![]() ![]() Light cyan, light magenta and light yellow doesn't come out.ġ. Only yellow and light yellow doesn't come out.Ĥ. Only magenta and light magenta doesn't come out.ģ. Only cyan and light cyan doesn't come out.Ģ. If the electrical contacts are damaged, there are 5 possibilities that will occur in the color cartridgeġ. When the printer is disassembled, the ink absorber is cleaned and reassembled, it is possible that the print head nozzles or electrical contacts may accidentally be touched. The printer may not print correctly if you touch print head nozzles and electrical contacts. ![]() #Service tool v3400 chip manualYou can download the MP287 Service Manual on the internet for free. Regarding resetting the MP287 printer, follow the instructions in the Canon MP280 / MP287 / MP288 Service Manual (manual code: QY8-13CW-000). #Service tool v3400 chip codeRelated to IC EEPROM damage caused by misuse of Service Tool, please read my post entitled "Canon Service Tool Error Code Mean (Error code: 002, 005, 006, 007, 009, etc)", in the discussion "Error: The indicator light flashes orange when entering Service Mode. reset with various versions of the Service Tool (try various kinds of Service Tool), what happens is the printer IC EEPROM will be damaged. Although most other blogs write, Service Tool version A (supports iP series, MP series, MG series, etc.), Service Tool version B (supports iP series, MP series, MG series, etc.), etc. What I'm worried about is that if the post is written: Canon MP287 can be reset with ST.1074, ST.3200, ST.3400, and ST.4718, then other people will be interested in trying them all. In my opinion, I prefer ST.1074 over other versions, because it is according to the MP287 Service Manual suggestion. Meanwhile, ST.3200, ST.3400, ST.4718, based on other people's experiences, can also be used to reset the MP287. Deleteīased on the Canon MP280 / MP287 / MP288 Service Manual document (QY8-13CW-000, page 6) it is explained that ST.1074 is used to reset it. ![]() So the cause of failure to enter Service Mode is caused when the printer has entered Service Mode, the user uses more than one Service Tool. If the printer has entered Service Mode, then the user uses more than one Service Tool but fails, and when the printer is turned off, the printer cannot enter Service Mode again. When a user tries with ST.3400 but fails, the printer should be turned off first, then repeat in Service Mode, then try it with a different Service Tool. Then the user tries to reset with ST.4718, and an error still appears, here the beginning of the error. Example: when the printer enters Service Mode, the user uses ST.3400 to reset, but fails. Based on the case that I encountered, failure to enter Service Mode is caused, when the printer has entered Service Mode, the user uses more than one Service Tool. Using the Service Tools program will not cause problems the next time you enter Service Mode.įailure to enter Service Mode is not caused by using the Service Tool. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |